Icom amateur radio

Some of the features of the new
IC-7700 transceiver are:

• HF/6m 200W RF output @ 100% duty cycle
• Outstanding design +40dBm 3rd order intercept point, 110dB dynamic range receiver
• Selectable IF roofing filters (3)
• Auto-tracking RF preselector
• Latest generation DSP units - one for transceiving and one for the spectrum scope
• Precision OXCO for hi-stability
• Colour 7" TFT LCD display
• IF-notch and NB DSP functions
• High performance 6m front end
• High speed automatic antenna tuner built-in
• Digital voice recorder
• Front panel USB ports for USB memory drive and keyboard
• Built-in RTTY/PSK31 requires only a keyboard for operation
• This transceiver is for advanced operators ONLY

*Bonus Manson 23A power supply is redeemable for A$50 discount

Outstanding features and value...

• Colour 5.8" TFT LCD display!
• Large spectrum scope display
• High speed automatic tuner
• Two 32-bit DSP ICs
• Three high-specification 1st IF roofing filters!
• High stability TCXO
• Greatly improved in-band IMD receive performance
• Excellent 104dB receive dynamic range and +30dBm 3rd order intercept point (IP3)
• DSP AGC loop management
• Digital IF filtering
• Digital twin passband tuning
• Digital manual notch filter
• Digital RF speech compression
• Microphone equalizer and adjustable transmit bandwidth
• 16-step DSP noise reduction
• Two USB connections
• RTTY/PSK31 requires USB key.
• CW/RTTY/PSK31 memory keyer

Outstanding features...

• 100W RF output on HF, 6m and 2m bands with 75W output on 70cm. 10W RF output on 23cm (requires extra cost UX-9100)
• Simultaneous dual receive - in specified band combinations
• Double conversion superhet.
• 32-bit DSP technology
• Main and sub-receive DSP with digital IF filters, AGC time constant, twin pass-band tuning, manual and auto notch filters, noise reduction and NB
• Optional 1st IF 3kHz and 6kHz filters (15kHz wide included)
• Optional D-Star DV module
• Optional CS-9100 program soft.
• GPS position reporting (opt. UT-121 and external GPS receiver required, although position data can be entered manually). 
• USB connector for PC control
• CI-V data format allows control by PC via USB or opt. CT-17
• Satellite mode sync. operation
• User-friendly keys allocation
• Voice synthesiser
• Built-in RTTY demodulator and decoder
• Built-in automatic ant. tuner
• Built-in electronic CW keyer
• Voice Squelch Control (VSC)
• Expansive multi-function LCD with band scope function, etc.

Click here for pre-release brochure! (pdf)
Note: Pre-release specs. may differ compared to actual product spec.
 

The Icom IC-746PRO transceiver incorporates a new 32-bit DSP.
Absolutely outstanding transmit audio quality and receiver sensitivity, coupled with excellent digital noise reduction performance, elevate this transceiver well above competitors anywhere near its price! 

• Continuous duty at 100W of RF output on HF, 6m and 2m!
• Built-in antenna tuner (HF/6m)
• Digital Noise Reduction (DNR)
• Microphone equalizer
• Digital RF speech compression
• Large, multi-function LCD

(A$1549 without power supply)

Learn More

The technical characteristics and advantages of IF DSP found in Icom's leading base station models are now available in a compact mobile HF/VHF/UHF All mode transceiver - the new IC-7000!

Outstanding features...

• Colour TFT display - 2.5 inch!
• Will receive PAL VHF colour TV transmissions after modification
• 100W RF on HF and 6m bands, 50W on 2m and 35W on 70cm
• Twin pass-band tuning
• DSP based IF filtering
• AGC loop performance controlled by DSP
• Digital IF filters
• 2-point manual notch filter
• Digital noise reduction
• Digital noise blanker
• DDS (Direct Digital Synthesizer)
• 508 channel memory
• High stability crystal oscillator
• User-friendly keys allocation
• Digital Voice Recorder (DVR)
• Built-in RTTY demodulator
• HM-151 remote control mic.
• Adj. SSB transmit bandwidth
• 2-mode band scope
• Multi function meter and SWR graphic display
• Is CHN #18 version IC-7000, as sold here by Icom Australia, an Australian version or a Chinese version??? We're very, very confused as Icom Australia claims they import Australian versions...

BONUS MANSON 23A POWER SUPPLY -OR- BONUS RMK-706 REMOTE KIT INCLUDED!
It's your choice!

(A$1349 without any bonuses)
(A$1449 with BOTH bonuses)

This model is discontinued
Last shipment of this iconic Icom!

Learn More

This compact all-mode high-performance mobile transceiver boasts a detachable front panel and base station features, including band scope display!

Our price includes the UT-106 DSP module which features excellent digital noise reduction and auto notch performance!
Please note; the UT-106 is a standard inclusion in USA (Australia) version IC-706IIG transceivers.
Beware of Australian competitors who don't include it and then have the audacity to charge extra for it!

• 100W RF on HF and 6m bands
• 50W on 2m and 20W on 70cm
• Simple operation
• 107 memory channels
• Up to 3 selectable pass-band widths plus IF shift and NB
• Digital S/RF/SWR meter
• Built-in electronic keyer
• CW reverse function
• Adjustable CW pitch
• Full break-in (QSK)
• AF speech compressor
• RF gain control
• VOX operation
• CI-V capability
• Optional AT-180 coax ATU
• Optional AH-4 long wire ATU

NOW WITH BONUS MANSON 23A POWER SUPPLY INCLUDED!

(A$1149 without power supply)

Learn More

The Icom IC-7200 transceiver incorporates Icom's latest DSP technology.

• 100W of RF output on HF & 6m
• Latest IF DSP technology allows filter width and shape changes
• Digital twin PBT (passband tuning) allows full IF shifting
• Digital noise blanker.
• Digital Noise Reduction (DNR) improves S/N. Adj. in 16 steps.
• Digital RF speech compression
• DSP control within AGC loop
• 201 memory channels
• Manual notch filtering. Preamp.
• VOX, RIT, CI-V interface, etc.
• The IC-7200 isn't waterproof
• MB-116 handles shown above are optional at extra cost
• Compare to new Alinco DX-SR8

NOW WITH BONUS MANSON 23A POWER SUPPLY INCLUDED!

(A$799 without power supply)

Learn More

With the superior performance found in the IC-718, such as wide dynamic range, high S/N ratio and full duty cycle operation, you will find making contacts easy and pleasurable.
Experience the combination of the latest RF and digital technology, along with compact size and simplified operation.

• 100 watts of power output
• Simple operation
• Microphone compressor
• Digital S/RF/SWR meter
• Front mounted loud speaker
• Optional DSP capability
• Interference rejection - IF shift
• RF gain control and VOX
• Optional UT-106 DSP unit is only A$149 from us!
• Compare to new Alinco DX-SR8

$1799.00 AUD
Six-year warranty
Sold out!

This iconic Icom is discontinued

Learn More

Arguably, the very best 2m/70cm all-mode transceiver - ever!

A powerful 100W of RF output power on the 144MHz band is provided by the newly designed power amplifier circuit.
The combination of aluminium die-cast chassis/heatsink and effective cooling fan ensures stable output for continuous operation.
A high 75W of RF output power is provided on the 430MHz band.

A respectable 10W of RF output power is available on the 1200MHz band when the optional UX-910 23cm band unit is installed!

• High performance receiver
• Ready-to-install (optional) 1200MHz (23cm) band unit,
  UX-910 is A$599 (not A$1069)  
• 9600bps packet operation
• Satellite communications ready!
• Optional UT-106 DSP unit $149

• 1,000 watts RF output
• Remote console included
• AC power supply built-in
• Available on your order w/dep.

Long wire automatic antenna tuner suits current Icom HF transceivers, such as IC-706 MkIIG, etc. 

• 120 watts SSB power handling
• Covers 80m to 6m bands with a 7m (23 feet) or longer wire
• 1 to 3 seconds tuning time
• 45 channel memory settings
• Weather resistant
• Can be used with coax fed antennas by using a 4:1 balun

The AT-180 is a fully automatic antenna tuner for tuning coaxial cable fed antennas.
Suits IC-7000, IC-706 series, etc...

• 120 watts SSB power handling
• Covers 160m to 6m bands
• Matching impedance range; 16.7 to 150 ohms on HF bands, 20 to 125 ohms on 6m band
• 70 preset memories
• Can be used with long wire antennas by using a 4:1 balun

The IC-208H is Icom's most powerful dual band mobile, delivering 55W/50W (VHF/UHF) RF output power levels due to individual MOS-FET high power amplifier modules.
These RF output power levels may be reduced to 15W or 5W for local communications.
Remote front panel control lead included!
Outstanding broadband performance.

We randomly check IC-208Hs for
heatsink finish, circuit board finish and glue, front panel to main body fitment, labels, RF power output vs. frequency, receiver sensitivity, computer programming, frequency alignment, factory seals, etc., etc.

Re cloning of some IC-208Hs by CS-208 and using USB cable;
Firstly, load the XP drivers from the disc (which is supplied with the cable).
Next, re-boot the computer, then load the CS-208 program.
Re-boot the computer.
Next, access the radio by computer. This may take a few minutes whilst the computer searches for the radio program.
You should now be able to program the radio. 

Note; there should be no problem cloning by way of a serial lead.

• Diversity reception (2 antennas required - certain bands/modes)
• Simultaneous dual watch capability (inc. in same band
• Wideband receive; 118-550MHz and 810MHz-999MHz
• 50W RF output, both VHF/UHF!
• 522 memory channels with DMS (Dynamic Memory Scanning)
• Bandscope function
• High stability TCXO fitted
• Green to amber variable display background colour
• 104 x 2 DTCS/50 CTCSS oper.
• 9600 bps packet terminal type 6-pin mini DIN connector
• Long or short squelch delay
• Automatic attenuator
• FM narrow capable
• Sub-band auto mute function
• 16 DTMF memory chs. (24 dig.)
• DTMF pager and code squelch
• Auto power off
• Front panel separation cable (OPC-1663, 3.4m long) and a short length (10cm) separation cable are both included!
• Optional UT-123 D-Star board is available at extra cost

**************************

ID-1 23cm D-Star transceiver
A$1299.00
Six-year warranty
Order required

• 50W/50W RF o/p on 2m/70cm
• Wideband receive; 118-174, 230-550 and 810-999MHz
• 1052 memory channels
• 16 DTMF memory channels
• CTCSS and DCS encode/decode
• The CS-80/880 free download cloning software is available from Icom Inc. (Japan) website. Requires optional OPC-1529R, OPC-478 or OPC-478UC cable
• Adjustable mic sensitivity
• Inbuilt 10dB receive attenuator
• Many scanning features
• Auto power save feature

• 65W RF output power on 2m!
• 207 memory channels with DMS (Dynamic Memory Scanning)
• 104 x 2 DTCS/50 CTCSS oper.
• 24 DTMF autodial memories
• DTMF code squelch and pager function w/opt. UT-108 board
• FM narrow capable
• Inbuilt 10dB squelch attenuator
• Optional UT-118 D-Star board is available at extra cost
   

IC-T70A
Dual-band 2m/70cm handheld

$279.00 AUD
Six-year warranty
In stock

Learn More

The new IC-T70A is a very capable and strong dualband handheld transceiver with high splash and dust resistance (IP54).

• RF output; 5W/2.5W/0.5W
• Tx; 144-148, 420-450MHz
• Wideband receive across
  136-174 and 400-479MHz
• CTCSS/DCSS encode/decode
• 302 memory channels in total
• Backlit alpha display
• 16 DTMF memory channels
• Large speaker w/700mW o/p
• CTCSS and DTCS included
• Power save feature
• Includes Icom BP-264 7.2V @ 1400mA/h Ni-MH battery pack and an AC charger
• Options; BC-167SA, BC-191, BC-193, BP-263, BP-264, BP-265, CP-23L, CS-T70, HS-94, HS-95, HS-97, OPC-474, OPC-478UC, OPC-515L, OPC-2006.

Enjoy a full 5 watts of RF output due to the supplied 1300mAh Lithium-Ion battery pack, Icom BP-217. Utilising the energy conserving settings, the BP-217 will provide up to 6 hours of operating time and greatly reduces both the size and weight needed to obtain 5W of RF output power.

Wideband receive range: 495kHz to 999.990MHz.

The IC-T90A transceiver incorporates a wideband AM, FM, and WFM scanning receiver.
Yes, you can hear your favourite TV channels, plus shortwave, AM and FM broadcast radio stations, too! 

Rugged D-Star-equipped 5W dual-band (2m/70cm) handheld has military toughness and is submersible to 1m!

• Multi-line display with simple bandscope
• Voice recorder and auto-reply voice message in DV mode
• 1,304 alpha-numeric memories
• Wideband receive from 495kHz to 999.99MHz (not continuous)
• Dual VFO operation
• Large backlit LCD and keypad
• CTCSS and DTCS included
• Four RF power output levels
• Includes Icom BP-256Li Li-Ion battery pack and AC charger!
• Optional HM-175GPS speaker-mic transmits position data

Optional HM-175GPS GPS speaker-microphone...only $299.00
 

The rugged IC-80AD can transmit and receive D-STAR format digital voice and 950 bps* data communication, simultaneously. Analog FM mode is also available.

• GPS position reporting functions
• Wideband receiver
• 5 Watts (typical) output power
• External DC power jack
• Total of 1052 memory channels with 8-character channel name
• 16 channels DTMF memory (24-digit)
• Built-in CTCSS/DTCS tone encoder and decoder (FM mode only)
• Four RF power output levels
• IPX4*2 water-resistant construction
• Selectable 10dB (approx.) receive attenuator
• Optional HM-189 GPS speaker-mic in stock - and discounted!
• Options are; AD-92SMA, BP216, BP-217, BC-167, BC-139, CP-12, CP-19R, FA-S270C, HM-75A, HM-131, HM-153, HM-166, HM-189GPS, HS-85, LC-163, MB-86, MB-107, OPC-254L and SP-13

Compare Icom's new IC-T70A to Wouxun, TYT, Baojie and other new dual-band handheld transceivers - and save plenty!

Warranties are not transferable. We don't offer replacement warranties.
Customer-caused damage is not covered by warranty, of course.