Scanning and Comm's Receivers

AR-DV1 --> In stock!

Digital Voice SDR Communications Receiver

The AR-DV1 is a truly unique receiver!

Ask us to mail or email an AR-DV1 colour brochure to you...
Limited stock of printed colour brochures
 (SDR = Software Defined Radio)

Please note; the AR-DV1 communications/scanning receiver
continues but the optional AR-DV1-TAI Tablet Interface and
the AR-DV1-TAI-OS Operating system on SD card are both
discontinued due to long-term shortage of a special board.  

Learn More

**AR-DV1 resolves many ANALOG modes**

• Receives analog and digital modes across 100kHz-1,300MHz
• Resolves USB-LSB-CW-WFM-NFM-AM analog modes
• Has 2,000 memories (in 40 banks of 50 mem) plus memory scanning
• IF filter BWs; 200Hz, 500Hz, 1.8kHz, 2.8kHz, 3.8kHz, 5.5kHz, 6kHz, 8kHz, 15kHz, 30kHz, 100kHz, 200kHz. Receive mode dependent!
• Alphanumeric channel labels. Discriminator o/p for external recorders
• Micro-USB computer interface
• Supply of programmer-friendly command list for PC control through terminal software
• CSV memory data capability for frequency uploads and downloads
• Digital data display, priority, clock, sleep timer, calendar & alarm!
• Noise reduction, auto notch, AGC, step adjust & offset receive
• Squelch modes; AM/FM level, FM noise, voice, tone & DCS squelch
• Built-in SD/SDHC card for audio recording. Internal speaker 8 ohms.
• Easy firmware updates through SDHC
• Recording/playback media; SD/SDHC supports logging. 1-channel, 19kHz sampling in wav format. Approx. 7 hrs. recording for 1GB
• Synchronous AM detection (SAH, SAL) and voice inversion, too!
• Has three VFOs. Dimensions; 178w x 50h 215d mm. Wt. 1.5kg.
• Includes 12Vdc @ 1A regulated AC plug-pack, telescopic whip antenna, 4GB SDHC card and printed operating manual!
• Requires 11~16Vdc @ 800mA approximately. BNC ant. socket fitted
• PC software NOT supplied. Audio output is in MONO only (no stereo)
• Mono-only WFM audio via AR-DV1's internal speaker & speaker-out
• Third party software programs for PC controlling of AR-DV1 is now available for purchase direct from several software suppliers!    

• Yaesu C4FM digital in V/D mode only
• Icom D-Star digital in narrow band only! Data mode not supported
• Alinco digital requires EJ-47U digital unit! Voice mode F1E only
• APCO25 Phase 1 digital in non-encrypted conventional mode only!
• AR-DV1 will not decode APCO25 Phase 2 digital transmissions
• NXDN digital (in 6.25kHz mode only) and 15-bit scramble, too!
• MOTOTBRO digital
• DMR digital (Tier 1 and Tier 2 modes, non-encrypted)
• dPMR digital (dPMR446 and Tier 1 mode only)
• Digital CR (AMBE+2 system only)
• Kenwood digital
• TETRA decoding will be included in new AOR AR-DV1 shipments!
• TETRA decoding upgrade will be available for in-use AR-DV1; P.O.A.
• TETRA decoding works ONLY in manual mode selection, not AUTO!
• In SCAN mode do not mix TETRA (T-DM) and non-TETRA modes!!
• TETRA de-encryption is NOT supported and can never be supported
• TETRA is supported in "direct" mode only! TETRA repeater mode or TETRA trunking via base station mode may never be supported!
• Receives conventional digital modes, not encrypted digital modes
• Accessories available for AR-DV1; ABF-128 Airband antenna filter
  and GT-1 Galvanic isolation transformer (ground loop isolation)

NXDN de-scramble function and discriminator
direct recording to SD feature now available!
 

All-new superwideband AR-DV10 digital receiver automatically detects 10 digital and 6 analog modes from 100kHz~1300MHz!

• Super-wide receive coverage from 100kHz to 1300MHz
• Ten (10) DIGITAL modes; DMR, APCO P25 (Phase 1 only), 
  Mototrbo, dPMR, NXDN, TETRA, D-CR, Icom D-Star, Alinco
  EJ-47 GMSK and Yaesu C4FM System Fusion
• Automatic detection of digital modes during scan and search
• Six (6) analog modes; FM, WFM, AM, SAM (Synchronous AM),
  SSB (USB & LSB) and CW
• Three different VFOs (A/B/Z)
• Selectable bandwidths; FM 6/15/30/100kHz, AM 3.8/5.5/15kHz,
  SSB 1.8/2.6kHz, and CW 200/500Hz.
• 2,000 memory channels (40 banks of 50 channels)
• Latest SDR DSP technology
• MicroSD card slot for recording, backup and firmware updates
  with the supplied 8Gb microSD card via your computer
• One-touch recording feature
• Audio recordings can be played and saved via microSD card
  as a WAV file
• Memory data management software
• Various scanning options available
• Frequency stability of +/- 5ppm
• Audio output of 700mW
• Water resistant to IPX5
• Size; 65w x 137h x 41d mm. Weighs 420g.
• International emergency 406MHz beacon firmware update included in our latest AR-DV10s. Licensed PROSIC unlock key may be purchased
• Receives conventional digital modes, NOT encrypted digital modes
• AR-DV10 does NOT support reception of trunked systems
• Includes 7.4V @ 2,000mA/h Lithium-ion battery, approved AC/DC charger, CC-10 charging cradle, cigarette lighter charger, telescopic chromed BNC whip antenna, black rubber duck type antenna, spring-loaded belt clip and 8GB microSDHC with adaptor!
• AR-DV10 optional accessories list is in the AR-DV10 chart below...

 AR-6000

Super-wideband multi-
mode 9kHz~6GHz receiver!

$6999 AUD
Place your order. Deposit required.
Subject to availability and
price confirmation!

Learn More

• World's first commercial receiver manufacturer to introduce a receiver with 9kHz-6,000MHz continuous receive coverage in 1Hz increments (2Hz>3.15GHz)
• Frequency bands above 3GHz are now populated with new signal standards, such as MLS, STL and FPU. These signals cannot be received/decoded with normal wideband receivers.
  AOR's AR-6000 is the solution!
• Distributed-constant circuitry ensures low noise and minimal performance deterioration
• Ultra-low noise down converter across 3.15GHz~6GHz range
• SDR architecture digitally processes signals from the 3rd IF stage for better performance
• Direct conversion for LF, MF and HF signals (9kHz~25MHz) to digital baseband format for high sensitivity and less images
• Zero IF synchronous system  detection for frequencies above 25MHz, for image reduction and clean digital I/Q signal output 
• USB-LSB-CW-WFM-NFM-AM
  and FM-stereo modes!
• 2,000 alphanumeric memory channels store mode, step...
• Bandwidths; 200Hz, 500Hz, 3kHz, 6kHz, 15kHz, 30kHz, 100kHz, 200kHz and 300kHz
• Has keypad entry, precision S-meter and SD card port
• Hi-resolution spectrum display
• Options; AS-5001 antenna switch, DC-8600 DC lead with cigarette lighter plug, P25-2300 APCO P25 mode board, IQ-5001 I/Q control unit (plug-in) with I/Q software, GP-5000 external GPS (for frequency reference)

***All-new AR-5700D***

ALL-NEW SUPERWIDEBAND DIGITAL communications receiver!

 AR-5700D...$6499 AUD

Place your order. Deposit required.
Subject to availability and
price confirmation!

Learn More

• Receives 9kHz-3,700MHz in analog and digital modes!
• Analogue receive modes; FM, FM-stereo, AM, synchronous AM,
  USB, LSB, CW, analogue I/Q & FM video
• Simultaneous receive (in analogue modes only)
• Ten (10) DIGITAL modes; DMR, dpMR, P25 Phase 1 and 2, D-Star, Alinco, Yaesu C4FM, NXDN, D-CR, TETRA direct and TETRA traffic channel. Encrypted signals are NOT supported in any mode!
• Tuning steps; 1Hz~999.999kHz
• Selectable operating modes; VFO (A~E), memory channel, memory channel scanning, select scanning, program search, FFT search
  (cyber search) spectrum display and analogue video demodulation
• SIMULTANEOUS RECEIVE in analogue modes only
• DUALBAND receive; one frequency below 25MHz and one frequency above 25MHz. Main + sub frequency offset receive (above 25MHz)
• TRIPLE receive; one HF frequency + offset receive
• Two antenna inputs (both N-J sockets); 25MHz~3.7GHz (ANT1) and 9kHz~3.7GHz (ANT2). 10MHz reference input; SMA-J (+2dBm typ.)
• 2,000 memory channels (50 memory channels x 40 banks)
• 5 VFOs, 40 search banks and 1 priority channel
• Scanning speed; 100 steps/channels per second (analogue modes)
• Frequency stability; 0.1ppm (after 5 minutes warm-up) or 0.01 ppm with optional (at extra cost) AOR GP5001 GPS unit/receiver
• Automatic detection of digital modes during scan and search
• Digital I/Q output; 0.9MHz bandwidth (BW) via USB 2.0 compatible isochronous transfer. Use supplied PC software AR-IQ-III. USB-B.
• Analogue I/Q output; 12kHz offset via 3.5mm stereo phone socket
  in AIQ mode, via line socket
• Headphones output; 3.5mm stereo phone socket
• External speaker output; 3.5mm mono phone socket (8 ohms)
• Line output; 3.5mm stereo phone socket, -10dBm (600 ohms)
• ACC1, ACC2, AUX1, AUX2, USB, analogue video out & DC input
• Circuit design; 9kHz~25MHz direct conversion, 25MHz~3.7GHz
  double conversion superheterodyne
• Digital signal processing (DSP) demodulation method
• Selectivity (typical values); CW 500Hz, AM 6kHz, SSB 3kHz, NFM 15kHz, WFM 200kHz
• IF BWs; 200Hz, 500Hz, 1kHz, 3kHz, 6kHz, 15kHz, 30kHz, 100kHz, 200kHz (actual choice is dependent upon mode selected). Note; IF bandwidth is auto-selected and non-changeable for digital modes
• Squelch modes; CTCSS, DCS & data-mute
• SD card compatibility; SD or SDHC type, 256MB to 32GB. File system FAT 16 or FAT 32 only. MiniSD & microSD require SD card adaptor
• Recording time; approx. 8 hours per 1GB. Squelch synchronisation possible in order to eliminate inactive time 
• DC power; 10.7V~16V (2A @ 12V). Audio o/p >1.5W into 8 ohms
• Size; 304 d x 220 w x 97 h mm. Weighs ~5kg.
• Supplied accessories; Approved AC power adaptor, SD card,
  operating manual, PC control software w/license dongle, 2xPC cables 
• Confirmed optional accessories line-up will be announced soon

*************************************************

NEWS --> re 3rd PARTY RECEIVER CONTROL SOLUTION

For your information, a 3rd party receiver control solution is now
available for the AOR AR5700D Digital Communications Receiver.
It's called VISUALRADIO and is now fully compatible with AR5700D.
It features complete receiver control with spectrum display. There are
options for LAN/Internet control and a powerful web based database.

See Visualradio website: www.globalnetcontrol.de

******************************************

Tokyo, Japan (May 25, 2020) – AOR’s AR5700D DIGITAL COMMUNICATIONS RECEIVER has been empowered with an
amazing & unique new feature: a GSSI user group filtering
function for trunked TETRA network reception!
 

AR-5001D

Wideband communications receiver!

 Now $4999 AUD
Place your order. Deposit required.
Subject to availability and
price confirmation!

Learn More

• Receives 40kHz-3,150MHz
• USB-LSB-CW-WFM-NFM-AM
  and AM synchronous modes!
• 2,000 alphanumeric memory channels store mode, step...
• Bandwidths; 200Hz, 500Hz, 3kHz, 6kHz, 15kHz, 30kHz, 100kHz, 200kHz and 300kHz
• Two dual-frequency modes!
• Special tri-frequency mode!
• 5 VFOs, DTMF decode, CW pitch, auto notch, noise reduction, noise blanker, etc.
• Has keypad entry, precision S-meter and SD card port
• Hi-resolution spectrum display
• Manual selection of FM stereo or FM mono. However, stereo
  is not indicated on the screen. Stereo is only via headphones and line-out. Internal speaker and speaker-out only in mono
• Options; AS-5001 antenna switch, DC-8600 DC lead with cigarette lighter plug, AP-5001 APCO P25 mode board, IQ-5001 I/Q control unit (plug-in) with I/Q software, GP-5000 external GPS (for frequency reference). Please contact us re pricing & availability of these options

************************

NOTES

Only AOR equipment purchased new from Andrews Communications and their authorised dealers carries the ACS/AOR factory-backed warranty.

Check AOR's authorised dealer list at www.aorja.com/aboutus/dealers.html

We have super-successfully (>99% success rate)
serviced AOR scanners and communications
receivers for over 45 years!  

We are AOR's exclusive authorised sales and servicing AOR dealer for
Australia and New Zealand.
 

SA-7000

Super-wideband base antenna

***30kHz~2,000MHz***

$469 AUD
PLENTY IN STOCK!

Learn More

• The SA-7000 is a super-wideband receiving antenna covering 30kHz~2,000MHz!
• SA-7000 has a built-in diplexer and two vertical elements
• The 1.8m long element covers to 30Mhz. The shorter loaded element covers up to 2GHz.
  Inbuilt loading coils are tuned
  to 150MHz and 800MHz, to optimise VHF Hi & UHF bands
• The SA-7000 requires only a single coaxial cable feedline which would plug into the SA-7000's weatherproof box
• SA-7000 package includes 15m of RG-58 coax cable with BNC and PL-259 plugs fitted, along with "V" clamps & instructions
• Requires 30~60mm dia. mast

      AR-IQ software

• Receive control
• IQ record and playback for AR-Alpha
• Store and playback up to 1MHz of bandwidth with quality loss!
• Re-listen, re-decode, tune to any frequency off-line - as if in real time!
• Loop a particular time frame
• Burst signals won't be missed when in waterfall display mode
• *AR-IQ software now included with new AR-ALPHA receivers
• System requirements apply!

Learn More

ABF-128...A$149

VHF AIRBAND (108~136MHz)
bandpass receive filter. 
Has BNC-F and BNC-M
connectors fitted.

PLENTY IN STOCK!

• The AOR ABF-128 passes VHF  108~136MHz Airband signals
• Rejection of signals above and below VHF Airband is typically
  25dB from 0.3~75MHz and
  20dB from 190~400Mhz
• Insertion loss is ~4dB.
• Impedance is 50 ohms
• Size; 77 x 18 x 18mm.
• Weighs 60g.

CAUTION REGARDING FAKE NEWS!

AOR Ltd. would like to raise your attention regarding an alarming increase in fake
news regarding its products, which are circulating on radio related forums, social
media groups such as on Facebook and on fake AOR websites.
The most recent fake news claims that a new AR-DV10 "MK2" version would
be released this year. That claim is totally false.
As a general rule and for the sake of common sense, we ask our dear and
honest customers never to trust rumours circulating on the Internet.
The only sources of information to be trusted regarding AOR products are
at www.aorja.com and at the websites of our network of official AOR
distributors as listed on http://www.aorja.com/aboutus/dealers.php .

New ICOM IC-R9500

Professional communications and scanning receiver

$18,999 AUD

Place your order

Free freight Australia-wide!

AUTHORISED ICOM AUSTRALIA DEALER

Learn More

• Super high performance multi-mode communications receiver
• 5kHz to 3,335MHz continuous receive frequency coverage 
• USB-LSB-FMN-FMW-AM-CW-FSK-P25 (P25 requires opt. UT-122)
• Extra-large 7" (177mm) multifunction LCD display
• 1220 memory channels, VSC (voice squelch), AFC (freq. control)
• Numerous scanning functions, DSP-controlled Noise Blanker
• High specification with high resolution spectrum scope
• Two point digital manual notch filter with 3 bandwidths
• Dual DSP for receiver & spectrum scope functions
• Multiple RSSI (signal indication) meters (S,dBu, dBu EMF & dBm)
• Five (5) roofing filters provide improved selectivity
• Multifunction spectrum scope (4 modes & peak search)
• Digital voice recorder and voice synthesiser inbuilt
• OXCO with high frequency stability of +/- 0.05ppm
• Reference frequency in/out terminal (10MHz -10dBm)
• CI-V remote control interface (CT-17 required)
• Many more functions are included
• Inbuilt 240VAC power supply
• Options are at extra cost
• Options; UT-122 P25 board, SP-20 speaker box, CT-17 level converter, AH-8000 discone antenna (100MHz~3,300MHz)
• Prices may slightly increase soon due to Icom accounting changes
• The customer is responsible for freight costs to and from the dealer and/or Icom Australia re warranty and chargeable repairs

ICOM

IC-R8600...$3999 AUD
Includes GME PSA-123 power supply!

In stock!

Free freight Australia-wide!

ALL-NEW ICOM IC-R8600 direct RF sampling, DSP and
superheterodyne, analogue and digital, multi-mode,
professional specification communications receiver!

IC-R8600 with PSA-123 AC/DC power supply...A$3999.
IC-R8600 with NO AC/DC power supply...A$3899.

Ranked #5 in receiving
performance by Sherwood Engineering's laboratory
compared to 200+ radios!  
See www.sherweng.com

The outstanding IC-R8600 is better performing than any comparably priced communications receiver
or scanning receiver!

AUTHORISED ICOM AUSTRALIA DEALER

Learn More

• NEW high performance wideband multi-mode analogue and multi-mode digital communications receiver with FPGA and DSP designs!
• 10kHz to 3,000MHz continuous receive frequency coverage
• Direct RF sampling from 10kHz to <1100MHz, then superheterodyne plus IF direct RF sampling from <1100MHz to 3Ghz  
• USB-LSB-FMN-FMW-AM-CW, D-Star, NXDN, dPMR and P25 phase 1
• Finest VFO tuning is in 10Hz steps! However, VFO resolution down
  to 1Hz settings is possible via the touchscreen "zoom" function
• Large 4.3" colour TFT touchscreen display
• Fast spectrum scope (+/- 2.5MHz range) and waterfall displays
• Modern FPGA/DSP architecture with superheterodyne circuitry
• Absolute value received signal strength displaying of "S", dBu, etc.
• 2,000 memory channels assignable to 100 groups, 100 scan skip channels and 50 pairs of programmable scan edges
• "Auto memory write" scans and memorises up to 200 channels
• Program & fine program scan (with offset scans), memory scan, selected memory scan, selected mode memory scan and auto
  memory write scan features
• Optional remote control function via IP network or USB cable
• Optional RS-R8600 PC control software controls all functions
• SD card slot provided for received log, decode log & voice recording
• Rear panel sockets include 10.7MHz IF output, LAN port, mute line, reference I/O, I/Q output, external speaker socket, AF/IF output,
  CI-V remote terminal, USB port, DC power input socket, three (3) antenna sockets (N/SO239/RCA) & grounding
• I/Q signal output supports SDR software & external decoding
• DMR, trunk-tracking and APCO 25 phase 2 modes are not available
• Size; 220w x 90h x 230d mm (not inc. projections). Weight; 4.3kg.
• The Icom IC-R8600 is available with, or without, the GME PSA-123 13.8Vdc @ 4A pk. AC/DC linear power supply. An AC/DC power-supply/plug-pack for the IC-R8600 isn't included by Icom Australia!
• IC-R8600 requires 13.8Vdc +/- 15% @ 2A current (50% duty cycle)
• Yes, our price includes free freight Australia-wide, too!
• Options are at extra cost
• Options; AH-8000 discone antenna (100MHz~3300MHz), CAB-1258
  3-pin in-line DC plug and lead assembly (same DC lead assembly as included with new IC-R8600), CS-R8600 programming software,
  MB-123 carry handle, RS-R8600 REMOTE control software, SP-39AD external speaker with built-in AC/DC power supply (for powering the
  IC-R8600) and SP-23 external speaker
• The customer is responsible for freight costs to and from the dealer and/or Icom Australia re warranty and chargeable repairs
  

ICOM IC-R6

$329 AUD

Plenty in stock!

Free freight Australia-wide!

AUTHORISED ICOM DEALER

Learn More

• Receives 0.1~1310MHz
• High speed scan @ 100ch/sec.
• AM-FMN-FMW modes
• 1300 memory channels in 22 memory banks
• Priority watch function with priority "beep" feature
• VSC - Voice Squelch Control - opens the squelch when a modulated signal is received
• Has audio low pass filter
• AM broadcast band ferrite bar antenna for optimised receive
• Loud 150mW audio output
• CTCSS and DTCS tone squelch plus reverse tone squelch
• RF attenuator built-in
• Auto-memory-write stores frequency, etc, when scanning
• Dial speed-up feature 
• Options are at extra cost
• Optional CT-17 CI-V-level converter for remote control operation, CS-R6 for PC programming, OPC-474 for receiver-to-receiver cloning
  and approved AC wall charger
• Customer-supplied AA alkaline batteries ensure long-lasting operation. Not included. 
• The IC-R6 is NOT supplied with
  NiMH rechargeable batteries
  or AC/DC wall charger as inclusions by Icom Australia
• The customer is responsible for freight costs to and from the dealer and/or Icom Australia re warranty & chargeable repairs

****************

ICOM IC-R6
with batteries & charger!

$369 AUD

Includes 2 x AA NiMH
1300mA/h rechargeable
 batteries and approved
AC plug-pack charger!

Plenty in stock!

Free freight Australia-wide!

AUTHORISED ICOM DEALER

****************

A delighted customer's report!

ICOM IC-R6 receiving Radio Turkey clearly on 9.61MHz (9,610kHz) at
~10am on Sunday, 27th March,
2022, using aftermarket antenna.

Above delighted customer's report;

• Excellent Airband performance
• Shortwave (HF) performance is brilliant if using an aftermarket telescopic whip, say 40cm long
• Works best on shortwave with the inbuilt attenuator "on" esp. when using long wire antenna
• Use opt. UNUN to impedance match Hi-Z long wire to IC-R6
• AM broadcast band ferrite bar antenna for optimised receive
• IC-R6 fits in palm of your hand
• Solid, "Made in Japan" quality
• Customer-supplied AA alkaline batteries ensure long-lasting operation. Not included. 
• Crisp and loud received audio
• Excellent FM broadcast receive
• Outstanding value for money! 
• Simple & easy operation
• Crystal clear LCD display
• Longer warranty than some...
• The IC-R6 is NOT supplied with
  NiMH rechargeable batteries
  or AC/DC charger as standard inclusions by Icom Australia
• The customer is responsible for freight costs to and from the dealer and/or Icom Australia re warranty & chargeable repairs

****************

Consider the optional Mobile One SMAiSCAN (SMA plug) 30cm long "rubber duck" antenna which
delivers high performance
due to its longer length and
resonant frequency ranges!

Mobile One SMA-SCAN performs as
a short wire antenna on shortwave (HF) and has optimum frequency ranges; 70~85MHz, 118~136MHz (Airband) and 420~480MHz (UHF).
 

NEW!

ICOM IC-R15  scanner!
 
$899 AUD
Place your order!

 Free freight Australia-wide!

AUTHORISED ICOM DEALER

Specifications & features...

• Receives 108~500MHz (FM) with continuous coverage and 76~108MHz (WFM) broadcast band, also with continuous coverage
• Dual-watch function
• TFT colour LCD & backlit keys
• 2,000 memory channels
• Numerous scanning functions
• High speed scan; 150 chs/sec.
• 200 auto-writing mem channels
• CTCSS, DCS & w/reverse tone
• Temporary skip function
• Micro-SD card slot for voice recording
• Bluetooth® for audio
  accessory connection
• USB Type-C charging
• IPX7 waterproof (submersible
  to 1m of water for 30 minutes)
• Power save function
• Key lock function
• Auto power OFF
• Battery voltage level display
• Supplied accessories; Antenna FA-S270C, super-high capacity BP-287 3,280mA/h @ 3.7V Li-ion battery pack, MB-127 belt clip, OPC-2480 USB Type-C™ charging cable and hand strap
• Size; 58w x 116d x 33.8d mm
• Weight; 260g with supplied antenna and battery
• Options are at extra cost
• Optional accessories; BC-223 desk-top charger, BP-293 dry cell battery case, CS-R15 programming software, LC-203 soft case & SP-40 earphone
• The customer is responsible for freight costs to and from the dealer and/or Icom Australia re warranty & chargeable repairs

**********************

ICOM IC-R30 digital/analog scanner!

SOLD OUT!

ICOM AUSTRALIA HAVE NOT YET  CONFIRMED IF, OR WHEN, IC-R30
WILL BE AVAILABLE

 Free freight Australia-wide!

AUTHORISED ICOM DEALER

Learn More

Specifications & features...

• Receives 100kHz~3,305MHz
• Receives D-Star®, APCO P25 (Phase 1), NXDN®, dPMR® (normal) & DCR in digital modes
• Receives USB-LSB-CW-AM-FMN-FMW in analog modes
• Up to 2,000 chs. memory with scanning @ 200 channels/sec
• Super-high capacity BP-287 3,280mA/h @ 3.7V Li-ion battery pack is included
• Only 4 hours charging with the included BC-223 drop-in rapid chgr. and BC-123SV AC charger
• Features RF gain, NB, voice synthesiser and Bluetooth®
• Intregrated GPS receiver displays your current position data, course, speed and altitude
• The IC-R30 can receive and record two different analog frequencies simultaneously
• Spectrum display and dual-
  receive of analog/analog and analog/ digital signals simultaneously!
• Inbuilt MicroSD card slot supports audio recording and receiver programming data
• Inbuilt GPS for position logging of recorded signals
• USB charging (5 hrs.) and full speed USB data transfer!
• Micro-SD & micro-USB ports
• Optional CS-R30 software for Windows® 7, 8.1 and 10
• Inbuilt Bluetooth® and free downloadable Android remote contol app will be included
• Includes double-hinged SMA telescopic antenna, BP-287
  3,280mA/h @ 3.7V Li-ion battery pack, BC-123SV AC charger, BC-223 drop-in rapid charger, USB/mini-USB charging lead, belt clip, wrist strap and operators manual
• Options are at extra cost
• Options; BP-293 (optional 3 x AA alkaline batteries are at extra cost), CS-R30 software, LC-189 soft case, SP-40 earphone, Bluetooth® headset; VS-3 with 4 remote buttons
• Prices may slightly increase soon due to Icom accounting changes from 1st April
• The customer is responsible for freight costs to and from the dealer and/or Icom Australia re warranty & chargeable repairs

DJ-X11E is discontinued and no stock is
available from us or from Alinco Japan!

Compare to similar all-mode super-wideband scanners!

ONE-YEAR WARRANTY!

Learn More

• Dual VFO simultaneous receive!
• Superwide main-band coverage of 50kHz~1.3GHz in all modes; AM/FM/WFM/SSB/CW
• Sub-band coverage in AM/FMN; 118~171MHz and 336~470MHz
• Huge 1200 channel memory 
• Voice-guidance system reads entering/entered frequency
• Easy-to-use twin dials
• Rugged polycarbonate body with rubber protectors
• Long-lasting 1800mAh Li-ion battery pack provides nearly 15 hours of operation at full audio output in single receive mode
• Large, brightly illuminated full dot-matrix LCD and keypad
• Dual VFOs plus Channel Scope
• Dual Channel-Scope (Alinco's patented spectrum analyzer- like feature)
• Frequency counter and flash tune, too!
• "Bug detector" searches for hidden transmitters
• RF gain and attenuator for both main/sub VFOs
• IF bandwidth >15kHz @ -6dB
• IQ bandwidth 86kHz @ -3dB
• IQ signal allows 3rd party software to operate the DJ-X11E as a SDR - amazing!
• SDR = Software Defined Radio
• The 10.7MHz IF output can be utilised with other receiver-related software such as at Winrad www.winrad.org and www.SDradio.eu/sdradio/ 
• Includes EBP-74 Li-ion 3.7V @ 1800mA/h battery pack, EDH-36 (accepts 3 x AA) dry cell battery case, AC charger and 23cm long "rubber duck" type SMA plug antenna
• Options are at extra cost
• Options; ESC-50 soft case, EME-6 miniature earphone, EME-26 curly cord earphone, EDH-33 cigarette lighter cable, EDS-12 remote controller and ERW-4C, ERW-7 and ERW-8
  PC connection cables.

************************

Consider optional Mobile One SMAiSCAN (SMA plug), 30cm long,
"rubber duck" antenna which delivers higher performance,
mainly due to its longer length

Andrews EBP-34H NiMH battery pack 4.8V @ 1800mA/h

SPECIAL PRICE

A$39
SOLD OUT!
One year warranty

Suits DJ-X10, DJ-X2000, DJ-G5.
(At 4.8V, DJ-G5 tx o/p will be 2W).
Alinco brand EBP-34N unavailable. 
 

Andrews EBP-36H NiMH battery pack 9.6V @ 700mA/h

SPECIAL PRICE

A$39
Plenty in stock!
One year warranty

Suits DJ-X10, DJ-X2000, DJ-G5.
Alinco brand EBP-36N unavailable.
 

NOTES

Insurance cover for goods in transit is available from us for only $2 per $100 value of goods. Please advise us if you require this option when ordering.

Please consider insurance because we are not responsible for loss of parcels or damage sustained by parcelsas the carrier is responsible! We do pack well!

Please do NOT write <fragile> on anything you send to us as doing so greatly increases the risk of damage. Please try to "double-box" all items sent to us.

We don't offer any replacement warranties. One year warranty for all new Alinco products we sell.
Customer-caused or environment- caused damage is not covered by warranty, of course.

Andrews Communications is Australia's ONLY Alinco factory-authorised factory-direct sales and service dealer/distributor.

Only Alinco equipment which is purchased new from Andrews Communications & our authorised dealers carries the ACS/Alinco factory-backed warranty.

Some accessories require a deposit when you place your order.
Options are at extra cost.

Prices are subject to change due
to exchange rate variations.
 

Compliment received

(16-09-14 by email)
 

Now only $699 AUD

NEWEST VERSION!
PLENTY IN STOCK!

Ships same day or next business day

Learn More

• Compact DIGITAL and ANALOGUE mobile/base scanner
• Trunk Tracking Version V. Australian version scanner
• Scans APCO-25 Phase 1 and Phase 2, Motorola, EDACS and LTR Trunking systems plus conventional analogue and digital channels
• Receives 25-512, 758-824, 849~868, 894~960 and 1240-1300MHz (23cm amateur radio) bands.
• Airband sensitivity 0.4uV (AM)
• Frequency ranges shown are not fully continuous and are not exact frequency limits.
• Tasmanian DMR EDACS is receivable by the UBCD-536PT when chargeable firmware is downloaded from Uniden Australia's website and installed in the UBCD-436PT!
• Alpha tagging of channels
• "Close Call" near-field RF capture technology
• "Quick key" system access
• Instant Replay of up to 240 seconds (i.e. up to 4 minutes of the most recent transmissions)
• Factory programmed microSD card for all district scan groups arranged by CFA frequency data base, and also the Dept. of Environment, Land, Water & Planning (DELWP) radio channel plan
• PC programmable - but cannot be computer controlled
• SENTINEL software WILL work with the UBCD-436PT but only with Windows® 7 and up OS; NOT XP OS or older
• The intuitive UBCD-436-PT is designed to be "future-proof"
• Genuine Australian version from Uniden Australia!
• Authorised Uniden Australia dealer from "Day One"
• Includes 4GB microSD card! (Supports up to 32GB); for storing Favourites list, Profiles, all of your scanner's settings, Discovery sessions and recording sessions
• Has CFA frequencies pre-programmed, in addition to pre-programmed Canadian and USA frequencies
• Also includes USB connection/charging cable, 3 x AA NiMh rechargeable batteries, AC adaptor/charger, cigarette lighter power adaptor, swivel belt clip, SMA-BNC antenna adaptor and a rubberised antenna
• More info soon. Photo for illustration purposes only
• Consider optional Mobile One SMAiSCAN (SMA plug), 30cm long, "rubber duck" antenna which delivers higher performance, mainly due to its longer length

$799 AUD

Plenty in stock!

Ships same day or next business day

Learn More

• Compact DIGITAL and ANALOGUE mobile/base scanner
• Trunk Tracking Version V. Australian version scanner
• Scans APCO-25 Phase 1 and Phase 2, Motorola, EDACS and LTR Trunking systems plus conventional analogue and digital channels
• Receives 25-512, 758-824, 849~868, 894~960 and 1240-1300MHz (23cm amateur radio) bands.
• Frequency ranges shown are not fully continuous and are not exact frequency limits.
• Airband sensitivity 0.3uV (AM)
• Tasmanian DMR EDACS is receivable by the UBCD-536PT when chargeable firmware is downloaded from Uniden Australia's website and installed in the UBCD-536PT!
• Alpha tagging of channels
• "Close Call" near-field RF capture technology
• "Quick key" system access
• Instant Replay of up to 240 seconds (i.e. up to 4 minutes of the most recent transmissions)
• Factory programmed microSD card for all district scan groups arranged by CFA frequency data base, and also the Dept. of Environment, Land, Water & Planning (DELWP) radio channel plan
• PC programmable - but cannot be computer controlled
• SENTINEL software WILL work with the UBCD-536PT but only with Windows® 7 OS and up; not XP OS or older
• The intuitive UBCD-536-PT is designed to be "future-proof"
• Genuine Australian version from Uniden Australia!
• Authorised Uniden Australia dealer from "Day One"
• Includes 4GB microSD card! (Supports up to 32GB); for storing Favourites list, Profiles, all of your scanner's settings, Discovery sessions and recording sessions
• Has CFA frequencies pre-programmed, in addition to pre-programmed Canadian and USA frequencies
• Also includes AC adaptor/charger, cigarette lighter power adaptor, USB connection cable, DC cable with orange wire, mounting bracket with screw and foot plus a telescopic whip antenna
• More info soon. Photo for illustration purposes only
  
  

Mobile Scanning Antenna
Package for 25~1300MHz

Uniden SCA-B123A

Package comprises 79cm long black fibreglass whip, 5/16" cone base,
4m RG-58 cable, FME socket and
FME to BNC plug adaptor.

Performance peaks on 70~85MHz
(as 1/4-wave), on 140~174MHz
(as 1/2-wave) and 420~480MHz
 (as 2 x 5/8-waves) bands!
Up to 8.2dBi gain on UHF!!
 
Only $69 AUD
Plenty in stock!

Outstanding antenna package!!

**********************

UNIDEN

Belt clip, suits UH-078/076
(etc.) & UBCD-396XT...A$19

In stock!