Alinco amateur radio

ALINCO DX-R8 Communications Receiver

Outstanding high performance communications receiver!
Remote operation requires optional EDS-17 remote kit.

 DX-R8 communications receiver!

$1099 AUD
Plenty in stock!

THREE-YEAR ALINCO WARRANTY!

Only from Andrews Communications!

Free freight Australia-wide!

Learn More

• General coverage receive from 150KHz to 35MHz in all modes!
• Receives in SSB, CW, AM and FMN modes
• Dual VFO operation
• Remoteable front panel!
  (EDS-17 cable option required)
• Large easy-to-read alphanumeric display
• Direct frequency entry via the front panel keypad
• SDR - Software Defined Radio! Free software required for SDR mode operation
• IF Shift, RIT, noise blanker and narrow filtering features
• Enhanced scanning modes
• Front panel selectable normal bandwidths; SSB/CW 2.4kHz wide, FM/AM 6kHz wide
• Front panel selectable narrow bandwidths; SSB 1.0kHz, CW 500Hz (A.F.), AM(N) 2.4kHz
• Frequency stability; +/- 1ppm
• RF attenuator and receive preamplifier
• 600 memories in 3 banks
• Front facing speaker
• Dimensions; 240w x 94h x 255d (mm). Weight; 4.1kg
• Audio output; 2W @ 10% THD
• Note; VFO tunes down to
  30kHz, but performance is not guaranteed from 30kHz-150kHz
• Includes Vanson SMP-1000A AC/DC 1A approved plug-pack power supply and EDC-37 DC cable
• Options are at extra cost
• Options;  EDC-36 mobile DC cable, EDC-37 DC cable, EDS-17 separation kit (inc. EBC-8 & 5m long front panel control cable but
  not main body mounting bracket/kit), and ERW-7 programming cable

Truly impressive!

DR-735T

ALL-NEW TWIN-BAND 2m/70cm 50/50W remoteable  transceiver has full cross-band duplex, cross-band repeater, dual in-band receive, wideband receive, huge multi-colour LCD display, etc...

$699 AUD

In stock!

THREE-YEAR ALINCO WARRANTY!

Only from Andrews Communications!

Free freight Australia-wide!

Learn More

Outstanding features include:

• 50W RF output on 2m band (144~148MHz)
• 50W RF output on 70cm band (430~450MHz)
• VHF/UHF full-duplex operation
• Cross-band repeater operation
• Commercial radio cross-mod., intermod and strong signal handling receive performance!
• Dual V/U and U/V receive
• Dual in-band V/V and U/U receive, too!
• Multiple wideband receive frequency ranges 108~136MHz (AM Airband), 136~174MHz
  and 400~480MHz in FMN mode
• Outstanding receive sensitivity
• 1000 programmable mem. chs.
• Three RF power output levels;
  50/20/5W on the 2m band and
  50/20/5W on the 70cm band
• Huge alphanumeric LCD display w/selectable backlight colours
• Independent volume, squelch and VFO tuning for each band
• Many scanning modes
• Removable control head can
  be remotely mounted
• Included illuminated EMS-79 DTMF handmic allows direct frequency keypad entry and remote control operation!
• CTCSS & DCS encode
• CTCSS tone and DCS scan
• Programmable VFO and Memory scanning modes
• Channel steps;
  5, 6.25, 8.33, 10, 12.5, 15, 20, 25, 30, 50 and 100kHz
• Requires 13.8Vdc @ 12A max.
• Front panel; 140w x 60h mm
• Main body; 140w x 40h x 188d
• Weighs about 1.3kg.
• Info. subject to confirmation!
• Options are at extra cost
• Options; EDS-8 RJ-45 plug to round 8-pin mic socket lead, EDS-30 remote separation kit (5m lead) and EJ-47U digital voice module.
  Some options may no longer be available
• "Twinband" transceivers allow simultaneous and independent operation on two bands at any time, e.g. receiving on one band whilst transmitting on the other band is possible. "Dualband" transceivers allow transmit or receive operation on only one band at any time
• Compare to all competing twinband mobile transceivers!!

NEW! DR-03T

Alinco 10m FM mobile!

10m 10W mobile FM transceiver

Now $379 AUD

Limited stock!

THREE-YEAR WARRANTY!

Only from Andrews Communications!

Free freight Australia-wide!

Learn More

• Tx/rx; 28~29.7MHz (10m band)
• Same key operations as DR-135/435 series mobile radios
• 10W/5W/1~4W selectable RF power output levels
• 100 memory channels
• Includes EMS-57 back-lit
  DTMF handmic
• Front panel data port
• Rear panel DB9 serial computer connection
• CTCSS, DCS encode and decode, DTMF encode and tone-burst are all included
• Super-wide 7-character alphanumeric display
• Ten auto-dial memories
• Theft alarm feature
• Requires 13.8Vdc @ 9A max.
• Options are at extra cost
• Some options may not be available

DR-06T

Alinco 6m FM mobile!

6m 50W mobile FM transceiver

Now $479 AUD

Limited stock!

THREE-YEAR WARRANTY!

Only from Andrews Communications!

Free freight Australia-wide!

Learn More  

• Tx/rx; 50~54MHz (6m band)
• Same key operations as DR-135-435 series mobile radios
• 50 watts; H(50W)/M(20W)/L(5W) selectable power levels
• 100 memory channels
• Includes EMS-57 back-lit
  DTMF handmic
• Front panel data port
• Rear panel DB9 serial computer connection
• CTCSS, DCS encode and decode, DTMF encode and tone-burst are all included
• Super-wide 7-character alphanumeric display
• Wide and narrow FM modes
• Theft alarm feature
• Requires 13.8Vdc @ 9A max.
• Options are at extra cost
• EJ-41U TNC boards in stock
• Optional plug-in EJ-41U TNC board (1200/9600bps) is for data communications, such as APRS and Packet, without needing an external TNC!

$469 AUD

Plenty in stock!

THREE-YEAR WARRANTY!

Only from Andrews Communications!

Free freight Australia-wide!

Learn More

Yes, you can get on DMR (Digital Mobile radio) and analog modes for less than the price of some analog-only amateur handheld transceivers!!
 
Features include:

• Analogue FM...and Digital DMR Tier I & Tier II
• Transmits 144~148MHz (2m band) and 430~450MHz (70cm band)
• Receives 136~174MHz and 400~480MHz. Has 1W audio o/p
• FM Broadcast band receive with 100 memory channels and VFO
• Selectable 5W, 2.5W, 1W & 0.2W RF output on 2m & 70cm
• Displays DMR ID, callsign, name and geographical info
• Programmable up to 4,000ch., 250 zones w/250ch. per zone
• GPS receiver inbuilt
• Real 2-slot DMR operation!
• Frequency stability +/-2.5ppm
• Digital channel spacing of 12.5kHz
• DMR Tier II 2-slot TDMA technology
• Digital recorder records up to 14 hours
• Analog channel spacing of 12.5kHz or 25kHz
• Programmable auto repeater shift in VFO mode
• Mixed mode operation. Includes VOX operation
• Dot matrix highly-visible full-colour 45mm backlit LCD
• Uses DVSI's AMB+2 vocoder for clear 1W audio output
• Text messaging with 100 pre-programmable text messages
• CTCSS (analogue only), DCS, DTMF, 2-tone, 5-tone; en/decode
• Standard and security features, such as Key lock, Lone worker, GPS positioning options, Check, Call alert, Remote monitor, scanning...
• SMA MALE socket fitted. We have three types of optional adaptors
  in stock to suit; SMA-F (at front) to SO-239 (at rear) adaptor,
  SMA-F to BNC-F and SMA-F to SMA-F double-female adaptor
• Includes EBP-88 Lithium-ion 7.4V @ 1700mA/h battery, EA-228
  SMA rubber antenna, EDC-189A charging cradle, wrist strap, EBC-34 belt clip, ERW-21 mini-USB to USB PC cable & approved AC charger!
• Will not transmit on UHF CB
• We don't program any radios
• Frequency programming software is NOT available from us or Alinco
• Options are at extra cost
• DJ-MD5 options; EMS-76 speaker-mic, EME-56A earphone-mic and EBP-87 Lithium-ion 7.4V @1500mA/h battery

A CANDID REVIEW OF THE ALINCO DJ-MD5

 I found the Alinco DJ-MD5 to be the best DMR hand held radio, yet.
The concept of DMR “code plugs” seems overwhelming at first, but it is
fairly straight forward. Firstly, program in the talk groups (think of these
as "rooms") you want to use; as many as you want. Then, program in
the channels –-> frequency, labels, and the talk group assignment to
that channel. Each channel is for a specific talk group and frequency.
In the case of a hotspot, the frequency would be the same on each
channel, just the label and talk group being different. Once this is done, simply set up the zones. Each zone is a bank of channels – maybe one
for your hotspot, one for a trip to Darwin re the various DMR or analog repeaters. Remember that when on a repeater you still need a channel
for each talk group! I found the software on the Alinco was better than several other brands of software. I could easily copy/paste and put the channels in the order I wanted in the zones. My DJ-G5 currently holds the entire database of DMR contacts and the display is the best of any radio
I have used. The display can stay on and NOT drain the battery, simply because it is OLED! I feel it's a great feature of the radio. In my opinion,
this is best DMR handheld anywhere near its price point. I am sure there
are some commercial radios that are better, but nowhere near its price.

In stock!

 THREE-YEAR WARRANTY!

Only from Andrews Communications!

Free freight Australia-wide!

Learn More

In stock!

THREE-YEAR WARRANTY!

Only from Andrews Communications!

Free freight Australia-wide!

Learn More

The DJ-G7T triband handheld is
a great companion to the new
IC-9700 triband transceiver!

Now...$599 AUD

Plenty in stock!

THREE-YEAR WARRANTY!

Only from Andrews Communications!

Free freight Australia-wide!

Learn More

Yes, you can now get on 23cm for far less than the price of some manufacturers' multiband handheld transceivers which don't include 23cm - and that's truly amazing!!
 
Features include:

• 5W RF output on 2m, 4.5W on 70cm and 1W on 23cm (EBP73)
• Super wideband receive from 530kHz to 1300MHz in AM/FM/WFM modes! Auto mode or manual mode selection. Some receive coverage gaps from 600MHz to 1300MHz
• Full duplex operation on any  two bands; 2m, 70cm or 23cm
• Cross-band repeater operation is easily enabled
• 1,000 alphanumeric memories with programmable mem. banks
• Many scanning modes
• Spectrum analysis display
• Conditional IPX7 submersibility
• Backlit LCD with contrast and brightness adjustments
• Twin "user assignable" dials
• DTMF tones and autodial mem.
• CTCSS/DCS encode-decode
• AM/FM broadcast band receive
• Automatic power off, alarm bell, tx-end beep, battery save, etc
• Built-in AM bar antenna
• VOX function. Cloning feature
• "Bug" device detection
• Diecast metal chassis!
• Includes EBP-73 Lithium-ion 7.4V @ 1200mA/h battery, EDC-173 charging cradle and approved AC charger!
• Options are at extra cost
• DJ-G7 options; EBP-73, EDC-36, EDC-37, EDC-43, EDC-173, EDH-35, EDS-11, EDS-14, EME-6*, EME-12A*, EME-13A*, EME-15A*, EME-26*, EME-21A*, EME-32A, EME-34A*, EME-36A, EMS-59*, EMS-62, ERW-4, ERW-7 and ESC-50. Options marked with (*) require EDS-14 spkr/mic adaptor cable.

ALL-NEW DIGITAL DMR 70cm amateur UHF transceiver!

Now $249 AUD

Only 1 in stock!

New low price! 

THREE-YEAR WARRANTY!

Only from Andrews Communications!

Free freight Australia-wide!

Learn More

Yes, you can get on DMR (Digital Mobile radio) and analog modes for less than the price of some analog amateur handheld transceivers!!
 
Features include:

• DMR Tier I and Tier II
• Transmits 430~450MHz
• Receives 400~480MHz
• Selectable 5W, 2.5W, 1W & 0.2W RF output on 70cm
• Programmable up to 1,000ch., 250 zones w/64ch. per zone
• Records up to 18 hours
• Analog channel spacing of 12.5kHz, 20kHz or 25kHz
• Digital ch. spacing 12.5kHz
• Dot matrix highly visible colour selectable backlit LCD
• Digital recorder. 1W audio o/p
• Quick contact accessing
• various security passwords
• Several alert tones
• Text messages
• Standard features, such as Key lock, Talk around, Lone worker, TOT, various call modes, Call logs, DTMF tones, scanning...
• Frequency stability +/-2.5ppm
• IP-54 dust and splash-proof compatible. IP-54 void when EMS-76 or EME-56A is fitted
• Has SMA MALE socket fitted. We have three types of opt. adaptors in stock to suit;
  SMA-F (at front) to SO-239
  (at rear) adaptor, SMA-F to
  BNC-F adaptor and SMA-F to SMA-F double-female adaptor
• Includes EBP-96 Lithium-ion 7.4V @ 2600mA/h battery, EA-212 SMA rubber antenna, EDC-211 charging cradle, wrist strap, EBC-45 belt clip and approved AC charger! Radio specs. & inclusions are subject
  to confirmation by Alinco
• Will not transmit on UHF CB
• We don't program any radios
• Frequency programming software is NOT available from us or Alinco
• Options are at extra cost
• DJ-MD40 options; EMS-76 speaker-mic and EME-56A earphone-mic. ERW-13 data programming cable. Some options may not be available

Alinco DJ-X11E

Super-wideband super advanced all-mode SDR scanning receiver!

(SDR = Software Defined Radio)

$699 AUD

Plenty in stock!

Compare to all similar scanners!

Free freight Australia-wide!

***Outstanding performance***
 

Learn More

• Dual VFO simultaneous receive!
• Superwide main-band coverage of 50kHz~1.3GHz in all modes; AM/FM/WFM/SSB/CW
• Sub-band coverage in AM/FMN; 118~171MHz and 336~470MHz
• Huge 1200 channel memory 
• Voice-guidance system reads entering/entered frequency
• Easy-to-use twin dials
• Rugged polycarbonate body with rubber protectors
• Long-lasting 1800mAh Li-ion battery pack provides nearly 15 hours of operation at full audio output in single receive mode
• Large, brightly illuminated full dot-matrix LCD and keypad
• Dual VFOs plus Channel Scope
• Dual Channel-Scope (Alinco's patented spectrum analyzer- like feature)
• Frequency counter and flash tune, too!
• "Bug detector" searches for hidden transmitters
• RF gain and attenuator for both main/sub VFOs
• IF bandwidth >15kHz @ -6dB
• IQ bandwidth 86kHz @ -3dB
• IQ signal allows 3rd party software to operate the DJ-X11E as a SDR - amazing!
• SDR = Software Defined Radio
• The 10.7MHz IF output can be utilised with other receiver-related software such as at Winrad www.winrad.org and www.SDradio.eu/sdradio/ 
• Includes EBP-74 Li-ion 3.7V @ 1800mA/h battery pack, EDH-36 (accepts 3 x AA) dry cell battery case, AC charger
• Options are at extra cost
• Options; ESC-50 soft case, EME-6 miniature earphone, EME-26 curly cord earphone, EDH-33 cigarette lighter cable, EDS-12 remote controller and ERW-4C, ERW-7 and ERW-8
  PC connection cables.

***All-new DJ-VX50T***

DUALBAND 2m/70cm 5W/4W
handheld transceiver

Only $229 AUD
Plenty in stock!

Plenty in stock!

THREE-YEAR WARRANTY!

Only from Andrews Communications!

Free freight Australia-wide!

Learn More

Dust and water-proof to IPX67, commercial-grade, dual-band,  5W/4W RF output transceiver.

• Tx 144~148MHz/430~450MHz
• 2m 5W/2W/1W & 4W/2W/1W
  on 70cm, RF o/p power levels
• Receives VHF 136~174MHz,
  AM Airband 118~136MHz ,
  WFM FM band 76~109MHz 
  and 400~470MHz on UHF
• Features V+V & U+U receive
• Superior cross-mod, inter-mod and adjacent channel receive!
• 200 alphanumeric memory channels with skip feature
• Large dot matrix 3-colour LCD
• FM broadcast band receive!
• Direct frequency keypad entry
• Auto repeater shift
• Several scanning modes
• 1W audio output
• Wide and narrow FM tx/rx dev.
• CTCSS and DCS en-decode, DTMF, 2-tone, 5-tone, TOT, reverse, tone-burst and BCLO
• Includes new EBP-101 high capacity 7.4V @ 1800mA/h
  Li-ion battery, EDC-219 rapid charging cradle, EA-253 SMA-P whip antenna, EBC-51 belt clip and approved AC charger!
• Options are at extra cost
• Optional EMS-76 speaker-mic, EME-56A earphone-mic. Some options may not be available
• Above info subject to change

DJ-500T

DUALBAND 2m/70cm 5W
handheld transceiver

Now...$229 AUD

Only 1 in stock!

THREE-YEAR WARRANTY!

Only from Andrews Communications!

Free freight Australia-wide!

Learn More

Dust and splash-proof to IPX54, commercial-grade rugged dual-band  5W RF output power transceiver.

• Tx 144~148MHz/430~450MHz
• 5W/2.5W/1W RF output power levels selectable on 2m/70cm
• Receives 136~174MHz on VHF
• Receives 400~480MHz on UHF
• Superior cross-mod, inter-mod and adjacent channel receive!
• 200 alphanumeric memory channels with skip feature
• Large dot matrix 3-colour LCD
• FM broadcast band receive!
• Direct frequency keypad entry
• Internal VOX circuit
• Several scanning modes
• Mil-spec vibration/shock resist.
• Wide and narrow FM tx/rx dev.
• CTCSS and DCS en-decode plus DTMF, 5-tone and tone-burst!
• Includes new EBP-87 high capacity 7.4V @ 1500mA/h Li-ion battery, EDC-189 charging cradle & approved AC charger!
• DJ-500T has SMA-M chassis mounted antenna connector.
  A double female SMA adaptor (joiner) will be needed when using a SMA-M fitted antenna.
  This is an optional extra
• Options are at extra cost
• Optional higher capacity EBP-88 1700ma/h @ 7.4V Li-ion battery pack, EMS-76 speaker-mic, EME-56A earphone-mic, mobile DC cable EDH-40 and EDC-198 mobile DC charging cable. Some options may not be available
  
  

DJ-175T

 Monoband 2m 5W
handheld transceiver

Now $149 AUD

Limited stock!

THREE-YEAR WARRANTY!

Only from Andrews Communications!

Free freight Australia-wide!

Learn More

• Tx range; 144~148MHz
• RF power o/p; 5W/2W/0.5W levels (w/EBP-72 NiMH battery)
• Wideband receive 136~174MHz
• Direct keypad frequency entry
• 200 alphanumeric memory channels with skip ch. feature
• 500mW of audio output
• DTMF keypad entry with 9 DTMF auto-dial memories
• Frequency steps 5kHz~30kHz
• Has scanning features
• CTCSS and DCS en-decode
• Tone burst
• Wire cloning possible
• Includes EBP-72 NiMH 7.2V
  @ 700mA/h battery pack, EDC-165 drop-in slow charge cradle and approved AC wall charger!
• Options are at extra cost
• Options; EBP-71 & 72 battery packs, EDC-164T (for charging EBP-71) and EDC-165 (for charging EBP-72) AC chargers,  EME-12/13/15/20/21A/23A, EMS-47 and EMS-59 speaker-mics, ERW-4C, ERW-7, ESC-49 soft case. Some options may not be available

**********************

DJ-V17T

 Monoband 2m 5W
handheld transceiver

Now $129 AUD
(was A$149)

Limited stock!

THREE-YEAR WARRANTY!

Only from Andrews Communications!

Free freight Australia-wide!

Learn More

• Tx range; 144~148MHz
• RF power output; 5W (800mW Lo) with EBP-65 NiMH battery
• Wideband receive 136~174MHz
• Direct keypad frequency entry
• Waterproof to IPX7 standard!
• 200 alphanumeric memory channels with skip ch. feature
• 500mW of audio output
• DTMF keypad entry with 9 DTMF auto-dial memories
• Frequency steps 5kHz~30kHz
• Has scanning feature
• CTCSS and DCS en-decode
• Includes EBP-65 NiMH 7.2V
  @ 700mA/h battery pack and approved AC charger!
• Options are at extra cost
• Options; EBP-63/64/65/66 battery packs, EDC-36/37/43 DC or cigarette lighter cables, EDC143/144//146/147 and EDC-159 AC chargers, EDH-34 battery case, EDS-10, EDS-11, EME-12/13/15/20 (all require EDS-10), EMS-59 speaker-mic (requires EDS-10), EMS-62 (EDS-10 NOT required) and ESC-41 soft case. Some options may not be available

DM-430E

One year warranty on Alinco power supplies and accessories

Click "Learn More" link below for
DM-430 pdf brochure (903.2K)

Learn More

• Can be used with almost any 100W RF out. SSB transceiver
• Front panel voltage adjustment
• Switchable pre-set 13.8Vdc or 5~15Vdc adjustable voltage
• Digital voltmeter & ammeter!
• Up to 30A peak current
• Up to 25A max. current (ICAS)
• Short circuit, over-temperature and automatic current limiting (over 30A) protection circuits!
• Rear panel DC screw terminal banana sockets (30A max.)
• Front panel mounted pair of Anderson Power Pole ® clip terminals rated to 30A
• Temperature controlled fan forced cooling
• Switch mode power supply
• Output voltage regulation <2%
• <80mV p-p ripple @ rated load
• Weighs about 1.6kg.
• Size; 125w x 60h x 160d mm
  

DM-330FXE

• Can be used with almost any 100W RF output HF transceiver
• Front panel voltage adjustment
• Customer-set voltage memory
• Switchable voltmeter/ammeter
• Short circuit, over-temperature and automatic current limiting (over 30A) protection circuits!
• Rear DC panel posts (30A pk.)
• Cigarette lighter socket (10A)
• 2 pairs of clip terminals (5A)
• USB port (2A max.). May not charge some cellular phones
• Has Noise Offset Circuit
• Switch mode power supply
• <5mV p-p ripple @ rated load
• Weighs 2.5kg.
• Size; 190w x 69h x 181d mm

 Plenty in stock!

One year warranty on Alinco
antenna tuners and all other
Alinco accessories.

 Learn More

• Can be used with almost any
  suitable HF transceiver
• Can cover a continuous frequency range of 3.5MHz to 30MHz when used with an antenna over 7 meters long
• Can cover a continuous frequency range of 1.8MHz to 30MHz when used with an antenna over 12 meters long
• Rated to 150 watts pep SSB (not 1500W!), 100W carrier
• Auto tunes in 2~3 seconds or
  1 second retune from memory
• Can memorise 250 frequencies!
• Includes 4.5m of 4-conductor control cable with 5-conductor in-line male plug fitted at one end. The other cable end is hard-wired into the EDX-3
• Includes 4.5m of coaxial cable with a PL-259 plug fitted at
  one end. The other coax end
  is hard-wired into the EDX-3
• Also includes two U-bolts, hardware & operation manual
• Will auto tune with most HF transceivers by simply grounding the EDX-3's "start" line whilst transmitting a carrier at the 10W RF o/p level
• Requires 13.8Vdc @ 2A (e.g. from compatible Alinco t'cvr.)
• Size; 23w x 10h x 40d cm
• Weight; 2.1kg.

***********************

ALINCO EBP-50N...A$49

 Limited stock!

Rechargeable Ni-MH 9.6V @ 700mA/h battery pack.

For DJ-596T, DJ-596II, DJ-193,
DJ-494, DJ-496 & DJ-593!

***********************

WARRANTY NOTES

Andrews Communications' standard warranty period on Alinco amateur radio transceivers we sell new of
one year is fully transferable. This standard one year fully transferable warranty period on Alinco amateur radio transceivers we sell new will
be extended by 2 years only on a non-transferable basis, thereby totalling a 3 year warranty period
for the original purchaser.
 
The extended warranty period of 2 years is not transferable and is for the sole benefit of the original purchaser only. One year warranty applies to all Alinco accessories we
sell new & includes batteries, etc.

 Warranty covers only faults in parts or workmanship. Warranty cover is not insurance cover, of course!

Customer-caused or environment caused damage is not covered by warranty, of course!

A valid sales receipt copy must accompany each warranty claim.
Include your name, address, email and phone number.

Andrews Communications has been super-successful in servicing Alinco products (to over 99% success) for 40+ years! No competitor can claim such a long and successful repair record. More warranty info below...
 

FREIGHT & INSURANCE NOTES

Please note that ALL Alinco transceivers listed on this page are amateur radio transceivers and as such require an amateur radio license for legal operation. We do NOT custom engineer any radios to operate in any special applications, such as on hang- gliders, pushbikes, motorbikes...

A valid sales receipt copy must accompany each warranty claim.
Include your name, address, email and phone number.